by Admin | Jun 28, 2017 | Uncategorized
Description NID-1010 Integrated TEDS* Adapter is electronic device that enables conversion from non-TEDS IEPE (ICP®) sensor into TEDS IEPE (ICP ) sensor according to standard ISO/IEC/IEEE 21451-7:2011. Our device allows data such as identification data about manufacturer, identification data about sensor, sensor’s technical characteristics, details regarding calibration etc. to be written onto it and read later. Unit is made in two variants (please see Ordering Information), modified for connecting via two most commonly used types of connectors used in industrial vibration sensors (accelerometers and velomitors): 2-pin MIL-C-5015 and M12. Buyer has to chose one of the variants during the ordering. We offer unit with two types of low noise cables suitable for IEPE (ICP®) sensors: with armor and without it. Type and length of low noise cable is user definable during the ordering process. Standard cable lengths are 3ft, 6ft and 10ft. There is a possibility of ordering any length of cable as long as it has no interference with IEPE (ICP®) signal. Reading and writing data is possible with any reader/writter that is fully compatible with standard ISO/IEC/IEEE 21451-7:2011. As option we offer NID-1011 TEDS Interface Kit with related software for writing and reading of TEDS data. It is possible to install and implement it in new and existing Condition Monitoring System (CMS) and Machinery Monitoring System (MMS), that are independent and/or SCADAsupported. ___________________ * Transducer Electronic Data Sheet (TEDS) contains the critical information needed by an instrument or measurement system to identify, characterize, interface and properly use the signal from an analog sensor. For more details see standard ISO/IEC/IEEE 21451-7:2011. Features Transforms non-TEDS IEPE sensor into...
by Admin | Feb 24, 2017 | Uncategorized
Description NID-2000 Dynamic Signal Simulator is a battery operated instrument which is used to electronically simulate outputs from various types of sensors and transmitters. The device can be used as standalone device or it can be PC driven via embedded USB communication. In PC mode the device provides all the capabilities of a stand-alone mode, with the difference that includes a number of useful tools that make it easier to use. Thus, for example, the software contains a database of sensors and transmitters major manufacturers in the area of vibration, but has and the option of “Customer defined”. Also by using the profile enables storing of data settings for future use, and so on. Features Simulates various sensor and transmitter signal outputs Fully compliant with the requirements of ISO 10816 (ISO 20816) standards Operates in two modes: standalone and PC based The software includes a sensors/transmitters database of the major manufacturers Automatic the creation of reports in PC mode enabled Loop powered current source output Tachometer TTL and OSO® output BOV test of IEPE (ICP) sensors supported Menu-driven operation Multi language menu Metric and Imperial units PC connection Battery operated Application Notes NID-2000 Dynamic Signal Simulator is suitable for checking and calibration measurement lines for dynamic parameters analysis, such as vibration analysis, structural analysis, etc. Function BOV (Bias Output Voltage) allows quick verification of the correctness IEPE (ICP) sensors and signal cables. Device is especially optimized for Machinery Monitoring Systems (MMS) and/or Machinery Protection Systems (MPS) according to ISO 10186 (ISO 20816) standards series, that are independent or supported by SCADA/DCS...
by Admin | Feb 18, 2016 | Uncategorized
Get In Touch Name Email Address Message Message 15 + 8 = Southern Asia Branch Office Company name: NORTH Instruments South Asia Branch Office Address: Block 445, Hougang Avenue 8, #03-1611 City, ZIP Code: SINGAPORE, SG-530445 Country: SINGAPORE Phone: +65 9018 8875 Phone: +65 9018 8875 E-mail: office@north-instruments.com GPS Coordinates: N 1.3791, E...
by Admin | Feb 18, 2016 | Uncategorized
Get In Touch Name Email Address Message Message 14 + 9 = European Branch Office Company name: NORTH Instruments LLC, Europe Branch Office Address: Trg cara Jovana Nenad 15 City, ZIP Code: Subotica, RS-24000 Province, Country: Vojvodina, Serbia Phone: +381 24 626271 & +381 24 626272 Fax: +381 24 626273 Email: office@north-instruments.com GPS Coordinates: N 46.10211, E...
by Admin | Feb 15, 2016 | Contact, Uncategorized
...
by Admin | Feb 15, 2016 | Contact, Uncategorized
NORTH Instruments LLC Company name: NORTH Instruments LLC Address: 265 Roswell Commons Cir. City, ZIP Code: Roswell, GA 30076 State, Country: Georgia, USA Phone: +1-678-531-8183 Get In Touch Name Email Address Message Message 9 + 7 = Contact and address Company Name: NORTH Instruments LLC Address: 110 Bradford Ct. City, ZIP Code: Roswell, GA 30076 State: Georgia Country: USA Phone: +1 678 5318183 GPS Coordinates: N 34.041164, E...
