by Admin | Jan 18, 2019 | Other Products, Our Instruments
Description NID-1010.1 Integrated TEDS* Adapter (with MIL connector) is an electronic device that enables conversion from non-TEDS IEPE (ICP®) sensors into TEDS IEPE (ICP®) sensors according to ISO/IEC/IEEE 21451-4:2010 standard. This device allows the user to read/write such data as identification data about manufacturer, identification data concerning the sensor, sensor’s technical characteristics, details regarding calibration etc. This device is made for connection to IEPE piezoelectric accelerometers and IEPE piezoelectric velocity sensors, which have two pin connector compatible with the MSL-DTL-5015 (formerly MIL-C-5015). With this unit, we offer two types of low noise cables suitable for IEPE (ICP®) sensors: cables with armor and without it. Type and length of low noise cable is user definable during the ordering process. Standard cable lengths are: 3ft, 6ft and 10ft. There is a possibility of ordering any length of cable as long as it has no interference with IEPE (ICP®) signal. Reading and writing data are possible with any reader/writer that is fully compatible with ISO/IEC/IEEE 21451-4:2010 standard. Optionally, we offer the NID-1001 TEDS Interface Kit with related software for writing and reading of TEDS data. Application note It is possible to install and implement the unit both in a new, as well as in the existing Condition Monitoring Systems (CMS) and Machinery Monitoring System (MMS), that are independent and/or SCADA/DCS supported. ___________________ * Transducer Electronic Data Sheet (TEDS) contains critical information needed by an instrument or measurement system to identify, characterize, interface and properly use the signal from an analog sensor. For more details see ISO/IEC/IEEE 21451-4:2010 standard. Features Datasheet Software User Manual Specification Transforms non-TEDS IEPE sensor into TEDS...
by Admin | Jan 24, 2018 | Other Products, Our Instruments
Description NID-1010.0 Integrated TEDS* Adapter (with M12 connector) is an electronic device that enables conversion from non-TEDS IEPE (ICP®) sensors into TEDS IEPE (ICP®) sensors according to ISO/IEC/IEEE 21451-4:2010 standard. This device allows the user to read/write such data as identification data about manufacturer, identification data concerning the sensor, sensor’s technical characteristics, details regarding calibration etc. This device is made for connection to IEPE piezoelectric accelerometers and IEPE piezoelectric velocity sensors, which have connector compatible with the IEC 60947-5-2 standard (Euro M12). With this unit, we offer two types of low noise cables suitable for IEPE (ICP®) sensors: cables with armor and without it. Type and length of low noise cable is user definable during the ordering process. Standard cable lengths are: 3ft, 6ft and 10ft. There is a possibility of ordering any length of cable as long as it has no interference with IEPE (ICP®) signal. Reading and writing data are possible with any reader/writer that is fully compatible with ISO/IEC/IEEE 21451-4:2010 standard. Optionally, we offer the NID-1001 TEDS Interface Kit with related software for writing and reading of TEDS data. Application note It is possible to install and implement the unit both in a new, as well as in the existing Condition Monitoring Systems (CMS) and Machinery Monitoring System (MMS), that are independent and/or SCADA/DCS supported. ___________________ * Transducer Electronic Data Sheet (TEDS) contains critical information needed by an instrument or measurement system to identify, characterize, interface and properly use the signal from an analog sensor. For more details see ISO/IEC/IEEE 21451-4:2010 standard. Features Datasheet Software User Manual Specification Price Transforms non-TEDS IEPE sensor into TEDS sensor...
by Admin | Jun 17, 2016 | Other Products
NID-1001/NID-1003 TEDS Interface Kit is a PC based TEDS Interface Kit. It can be used to read or write TEDS information in supported TEDS sensors. Software covers ISO/IEC/IEEE 21451-4:2010 standard for smart transducers interface. It is designed to read/write TEDS information using the mixed mode communication. Interface Kit supports all standard Templates according to the ISO/IEC/IEEE 21451-4:2010 standard. Non-standard Templates can be easily added upon the customer request. TEDS Interface Kit is Plug & Play, USB powered from PC. PC software is easy to use, with an upgrade possibility. The sensor information can be also stored to the file. Standard interface kit includes: hardware and software with two Templates upon the customer request. Features Datasheet Software User Manual Specification Price Triaxial accelerometer support Reading TEDS information from the sensor Allows updating of sensor calibration data All IEPE TEDS sensors are supported Supports ISO/IEC/IEEE 21451-4:2010 PC based, user-friendly software USB powered, plug and play NID-100x datasheet v1.1 – Letter NID-100X Software 2.0.1012 – Inputs/Outputs PC connection: USB 2.0 Sensor connection: 10-32 Connectors (Microdot) Environmental Characteristics Temperature: Operating -10°C to +65°C Storage -18°C to +65°C Humidity: 95% R.H. maximum Physical characteristics Dimension: 68 mm x 25 mm x 13 mm Weight: 16 grams Case: Molded plastic case NID-1001: USD 450.00 NID-1003: USD...
