by Admin | Jan 24, 2018 | Other Products, Our Instruments
Description NID-1010.0 Integrated TEDS* Adapter (with M12 connector) is an electronic device that enables conversion from non-TEDS IEPE (ICP®) sensors into TEDS IEPE (ICP®) sensors according to ISO/IEC/IEEE 21451-4:2010 standard. This device allows the user to read/write such data as identification data about manufacturer, identification data concerning the sensor, sensor’s technical characteristics, details regarding calibration etc. This device is made for connection to IEPE piezoelectric accelerometers and IEPE piezoelectric velocity sensors, which have connector compatible with the IEC 60947-5-2 standard (Euro M12). With this unit, we offer two types of low noise cables suitable for IEPE (ICP®) sensors: cables with armor and without it. Type and length of low noise cable is user definable during the ordering process. Standard cable lengths are: 3ft, 6ft and 10ft. There is a possibility of ordering any length of cable as long as it has no interference with IEPE (ICP®) signal. Reading and writing data are possible with any reader/writer that is fully compatible with ISO/IEC/IEEE 21451-4:2010 standard. Optionally, we offer the NID-1001 TEDS Interface Kit with related software for writing and reading of TEDS data. Application note It is possible to install and implement the unit both in a new, as well as in the existing Condition Monitoring Systems (CMS) and Machinery Monitoring System (MMS), that are independent and/or SCADA/DCS supported. ___________________ * Transducer Electronic Data Sheet (TEDS) contains critical information needed by an instrument or measurement system to identify, characterize, interface and properly use the signal from an analog sensor. For more details see ISO/IEC/IEEE 21451-4:2010 standard. Features Datasheet Software User Manual Specification Price Transforms non-TEDS IEPE sensor into TEDS sensor...
by Admin | Jun 28, 2017 | Uncategorized
Description NID-1010 Integrated TEDS* Adapter is electronic device that enables conversion from non-TEDS IEPE (ICP®) sensor into TEDS IEPE (ICP ) sensor according to standard ISO/IEC/IEEE 21451-7:2011. Our device allows data such as identification data about manufacturer, identification data about sensor, sensor’s technical characteristics, details regarding calibration etc. to be written onto it and read later. Unit is made in two variants (please see Ordering Information), modified for connecting via two most commonly used types of connectors used in industrial vibration sensors (accelerometers and velomitors): 2-pin MIL-C-5015 and M12. Buyer has to chose one of the variants during the ordering. We offer unit with two types of low noise cables suitable for IEPE (ICP®) sensors: with armor and without it. Type and length of low noise cable is user definable during the ordering process. Standard cable lengths are 3ft, 6ft and 10ft. There is a possibility of ordering any length of cable as long as it has no interference with IEPE (ICP®) signal. Reading and writing data is possible with any reader/writter that is fully compatible with standard ISO/IEC/IEEE 21451-7:2011. As option we offer NID-1011 TEDS Interface Kit with related software for writing and reading of TEDS data. It is possible to install and implement it in new and existing Condition Monitoring System (CMS) and Machinery Monitoring System (MMS), that are independent and/or SCADAsupported. ___________________ * Transducer Electronic Data Sheet (TEDS) contains the critical information needed by an instrument or measurement system to identify, characterize, interface and properly use the signal from an analog sensor. For more details see standard ISO/IEC/IEEE 21451-7:2011. Features Transforms non-TEDS IEPE sensor into...
by Admin | Mar 20, 2017 | News
We are proud to inform all concerned that a Reliability Direct Inc. from Houston, TX, USA have in their offer the products of NORTH Group, too. The products in question are NID-1100 Rotor Speed Simulator, manufacturer NORTH Instruments LLC, Member of NORTH Group in Atlanta, GA, USA, and the product PC-100 Proximity Probe Checker, manufactured by NORTH Protection Ltd., Member of NORTH Group in Subotica, Vojvodina, RS. Reliability Direct Inc. is the leading US and worldwide online supplier of equipment for predictive maintained (PdM) and Condition Monitoring Systems (CMS). Negotiations are ongoing other products of NORTH Group to be classified in the offer of the renowned...
by Admin | Feb 24, 2017 | Uncategorized
Description NID-2000 Dynamic Signal Simulator is a battery operated instrument which is used to electronically simulate outputs from various types of sensors and transmitters. The device can be used as standalone device or it can be PC driven via embedded USB communication. In PC mode the device provides all the capabilities of a stand-alone mode, with the difference that includes a number of useful tools that make it easier to use. Thus, for example, the software contains a database of sensors and transmitters major manufacturers in the area of vibration, but has and the option of “Customer defined”. Also by using the profile enables storing of data settings for future use, and so on. Features Simulates various sensor and transmitter signal outputs Fully compliant with the requirements of ISO 10816 (ISO 20816) standards Operates in two modes: standalone and PC based The software includes a sensors/transmitters database of the major manufacturers Automatic the creation of reports in PC mode enabled Loop powered current source output Tachometer TTL and OSO® output BOV test of IEPE (ICP) sensors supported Menu-driven operation Multi language menu Metric and Imperial units PC connection Battery operated Application Notes NID-2000 Dynamic Signal Simulator is suitable for checking and calibration measurement lines for dynamic parameters analysis, such as vibration analysis, structural analysis, etc. Function BOV (Bias Output Voltage) allows quick verification of the correctness IEPE (ICP) sensors and signal cables. Device is especially optimized for Machinery Monitoring Systems (MMS) and/or Machinery Protection Systems (MPS) according to ISO 10186 (ISO 20816) standards series, that are independent or supported by SCADA/DCS...
by Admin | Oct 11, 2016 | News
On September 29, 2016 it was our honor and pleasure to welcome Mr. Jose R. BLANCO GONZÁLEZ, Managing Director and Mr. Juan MENÉNDEZ BLANCO, Technical Director of TWave S.L. from Spain in NORTH Instruments LLC – European Branch Office in Subotica, Serbia. As a first step of our cooperation, during their visit it was agreed for TWave S.L. to become our representative for Spain and Portugal, whereas NORTH Instruments LLC would be a distributor of TWave products on the US market. However, Mr. GONZÁLEZ`s and Mr. BLANCO`s visit gave us an opportunity to discuss not only commercial, but also technical challenges both of our companies face during the process of design, development, production and sales of test and measurement instruments. As a result of these discussions, we have agreed to try to overcome mutual obstacles by planning joint projects in near future. For more information on TWave S.L. please visit their web site at...
